MS-6507 AUDIO DRIVER

Never pour any liquid into the opening that could damage or cause electrical shock. Make sure that all the connectors are connected to proper power supplies to ensure stable operation of the mainboard. Use a grounded wrist strap before handling computer components. Make sure that you apply an even layer of thermal paste or thermal tape between the CPU and the heatsink to enhance heat dissipation. W hen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating.

Uploader: Dit
Date Added: 13 December 2013
File Size: 70.43 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5046
Price: Free* [*Free Regsitration Required]

Always make sure the cooling fan c an work properly to protec t the CPU from overheating. Fasten down the lever.

MSI 6507 MS-6507 Intel socket 478 Motherboard AGP 3x PCI Sound USB 4x DDR Sound

The PCI Express x16 slot supports up to 4. Make sure that you apply an even layer of thermal paste or thermal tape between the CPU and the ms-5607 to enhance heat dissipation. Lay this equipment on a reliable flat surface before setting it up. Press the CPU down firmly into the socket and close the lever.

MSI MS Intel socket Motherboard AGP 3x PCI Sound USB 4x DDR Sound

Operation is subject to the auio two conditions: Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  3D RAGE PRO AGP 2X VISTA DRIVER

Make sure that you raise the lever up to a degree angle. Mz-6507 hile doing the installation, be careful in holding the components and follow the installation procedures. Do not place anything over the power cord. Look for the gold arrow on the CPU. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

MSI MSL – motherboard – micro ATX – Socket – i Overview – CNET

Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. Alternatively, please try the following help resources for further guidance.

DDR3 pins, 1.

If any of the following situations arises, get the equipment checked by service personnel: If the mainboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. T he gold arrow s hould point as shown in the picture.

MSi MS-6507E User Manual: Front Panel Audio Connector: Jaud1

Enabling Dual-Channel mode can enhance the system performance. You can connect a network cable to it. LAN link is established. However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking.

  DCL 22A DRIVER DOWNLOAD

Notice 2 Shielded interface cables and A. Reorient or relocate the receiving antenna. The power cord or plug is damaged.

Gold arrow O 4. Use a grounded wrist strap before handling computer components.

The CPU can only fit in the correct orientation. You can differentiate the color of the audio jacks audiio different audio sound effects. Open the lever Sliding the plate 90 degree 2. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides.

If you want to clear the system configuration, set the jumper to clear data. Then return to pin position. Position the cooling set onto the 2. Avoid clearing auido CMOS while the system is on; it will damage the mainboard.